MEYER SOUND 900-LFC POWERED SUBWOOFER RENTAL

Hire
  • Rent from $ 150.00 / Day
Total: $ ()
Rental return within days
Categories: , ,

Meyer Sound 900-LFC Powered Subwoofer

Meyer Sound 900-LFC compact low frequency control element reproduces low frequencies at high, continuous output levels with extremely low distortion. The 900-LFC offers the same sonic linearity as Meyer Sound 1100-LFC low-frequency control element in a smaller, lighter cabinet, making it an ideal solution for small- to medium-sized touring applications and fixed installations. A newly designed class D amplifier provides unprecedented efficiency to the 900-LFC, significantly lowering distortion while reducing power consumption and operating temperature. The onboard amplifier and control circuitry are contained in a single, field-replaceable module. In addition to pairing with LEOPARD systems, the 900-LFC integrates easily with other Meyer loudspeaker systems, including LEO-M, LYON and Ultra Series.

Features:

  • Compact cabinet with small footprint and extraordinary power-to-size ratio
  • High peak power output with extremely low distortion
  • Exceptional linearity, transient reproduction, and low-frequency clarity
  • Self-powered for simplified setup and increased reliability
  • Stackable and flyable in regular and cardioid arrays, with tilt and splay options
  • Integral pole-mount receptacle easily pairs the subwoofer with ULTRA Series loudspeakers

Specifications:

  • ACOUSTICAL1
    • Operating Frequency Range2: 30 Hz – 125 Hz
    • Frequency Response3: 32 Hz – 115 Hz ±4 dB
    • Phase Response: 40 Hz – 110 Hz ±30°
    • Linear Peak SPL4: 133 dB with crest factor >10 dB (M-noise), 133 dB (Pink noise), 134.5 dB (B-noise)
  • COVERAGE
    • 360° (single unit); varies with number of units and configuration
  • TRANSDUCERS
    • Low Frequency: One 18-inch, dual-coil, long-excursion cone driver; 2Ω nominal impedance
  • AUDIO INPUT
    • Type: Differential, electronically balanced
    • Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
    • Connectors: XLR 5-pin female input with male loop output; XLR 3-pin female connectors available to accommodate only balanced audio (no RMS signals)
    • Input Impedance: 10 kΩ differential between pins 2 and 3
    • Wiring:
      • Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
      • Pin 2: Signal +
      • Pin 3: Signal –
      • Pin 4: RMS
      • Pin 5: RMS
      • Case: Earth ground and chassis
    • Nominal Input Sensitivity: 6.0 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
    • Input Level: Audio source must be capable of producing +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
  • AMPLIFIER
    • Type: Two-channel, open-loop, class D
    • Total Output Power6: 3100 W peak
    • THD, IM, TIM: <0.02%
    • Cooling: Convection
  • AC POWER
    • Connectors: powerCON 20 input with loop output
    • Automatic Voltage Selection: 90–265 V AC, 50–60 H
    • Safety Rated Voltage Range: 100–240 V AC, 50–60 Hz
    • Turn‑on and Turn‑off Points: 90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC
  • CURRENT DRAW
  • Idle Current: 0.60 A rms (115 V AC), 0.49 A rms (230 V AC), 0.63 A rms (100 V AC)
  • Maximum Long-Term Continuous Current: (>10 sec)4.9 A rms (115 V AC); 2.5 A rms (230 V AC); 5.2 A rms (100 V AC)
  • Burst Current (<1 sec)7: 8.8 A rms (115 V AC), 4.7 A rms (230 V AC), 11.0 A rms (100 V AC)
  • Maximum Instantaneous Peak Current: 18.2 A peak (115 V AC), 9.2 A peak (230 V AC), 20.6 A peak (100 V AC)
  • Inrush Current: < 20 A peak
  • RMS NETWORK
    • Equipped with two‑conductor twisted‑pair network, reporting all operating parameters of amplifiers to system operator’s host computer.
  • PHYSICAL
    • Dimensions without Rigging: W: 27.43 in (697 mm) x H: 24.43 in (621 mm) x D: 24.89 in (632 mm)
    • Dimensions with Rigging: W: 27.47 in (698 mm) x H: 24.43 in (621 mm) x D: 24.89 in (632 mm)
    • Weight without Rigging: 136 lb (61.7 kg)
    • Weight with Rigging: 159 lb (72.1 kg)
    • Enclosure: Premium multi-ply birch with slightly textured black finish
    • Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
    • Rigging: Optional end frames with captive GuideALinks secured with 0.3125 in x 0.63 in quick release pins that allow 0°, 1.25°, 2.5°, 3.75°, or 5° splay angles; detachable side handles. Rigging supports ground-stacked, flown, and cardioid configurations.
    • Pole Mount:
      • U.S. version: 1.5 in (38 mm)
      • E.U. version: 1.375 in (35 mm and M20 thread at the bottom)

Related products