The UM-1P and the UM-100P self-powered
stage monitors are designed for high-level, full-bandwidth monitoring, cleanly reproducing stage mixes that include vocals
and musical instruments. These units provide efficient response down to 60 Hz. The
compact enclosure houses a 12-inch cone
driver and a 3-inch-diaphragm compression driver. The combination of high-performance drivers and perfectly matched
drive electronics yields flat amplitude and
phase response plus near-perfect impulse
response over the full audio bandwidth —
with benefits including lower susceptibility
to feedback. Maximum SPL is 133 dB at one
meter, with exceptionally low distortion.
Two different high-frequency coverage
patterns are available. The UM-1P provides
a narrow, symmetrical beamwidth of 45
degrees horizontal and vertical, allowing
close placement of monitors with minimal
interaction between them. The UM-100P
offers coverage of 100-degrees horizontal
and 40-degrees vertical, permitting broad
coverage in stage monitoring applications.
UM-1P/UM-100P : Narrow/Wide Coverage Stage Monitors
DATASHEET
The constant-Q design of the high-frequency horns provides uniform beamwidth
across the entire operating range in both
the horizontal and vertical planes. Attenuation outside the beamwidth is rapid and
uniform at all frequencies, with minimal
side lobing.
Each driver is individually powered by a
dedicated channel of the proprietary class
AB/bridged amplifier with complementary
MOSFET output stages. Total power is 550
watts. The incoming audio signal is processed through an electronic crossover
and correction filters for flat phase and
frequency response as well as for driver
protection. Phase-corrected electronics
ensure flat acoustical amplitude and phase
response, resulting in exceptional impulse
response and precise imaging.
Field-replaceable audio input modules accommodate a range of applications. The
standard version offers looping XLR input
and output connectors, while an enhanced
looping version adds polarity switching (the
ULTRASERIES
16.50" w x 22.38" h x 15.44" d
(419 mm x 568 mm x 392 mm)
77 lbs (34.93 kg)
Premium birch plywood
Black textured
Powder-coated hex-stamped steel,
foam covering
Dimensions
Weight
Enclosure
Finish
Protective Grille
looping output is not affected) and input attenuation (0 dB to -18 dB). A summing mono
version with two inputs is also available.
The amplifier/processing package incorporates Meyer Sound’s Intelligent AC™ system,
which performs automatic voltage selection, EMI filtering, soft current turn-on and
surge suppression, and allows fail-safe
operation worldwide.
The UM-P cabinet is constructed from
premium birch plywood and covered in a
black textured hard-shell finish. Recessed
handles allow easy transit, a hex-stamped
steel grille protects the speakers, and a
grey foam grille covering is included. The
enclosure can be custom painted for applications requiring specific cosmetics.
UM-P models are compatible with the RMS™
remote monitoring system, which offers
comprehensive monitoring of system parameters on a Windows®-based network.
Flat frequency and phase response afford
high levels of gain before feedback
The UM-1P offers a symmetrical, constant Q horn for precise coverage with minimal
interaction between adjacent units
The UM-100P offers a wide-coverage
constant-Q horn, providing maximum
freedom of movement for performers
features & benefits
High peak power ensures excellent
transient response
Low-profile cabinet preserves sight lines
Built-in precision electronics eliminate
the need for external crossovers and
amplifiers
applications
Vocal stage monitor
Monitor for keyboard and other instruments
Stage monitoring sidefill
Stage monitoring drum fill (in combination
with USW-1P subwoofer)